Torsion spring replacement in the Dallas-Fort Worth area typically costs $150 to $450. The final number depends on how many springs your door uses, the wire size and length of the spring, whether it is rated for standard or high cycle use, and how much labor the job takes. A single spring on a lightweight door lands near the low end. Two springs on a heavy insulated door, especially if cables or drums also need attention, pushes the price toward the top of the range.
What determines a torsion spring price
Most garage doors use either one or two torsion springs mounted above the door. A single spring door is usually cheaper to fix because there is only one part to replace and less time spent balancing the door afterward. A two spring door costs more because both springs typically get replaced together, even if only one broke, since the second one is close to the end of its life anyway.
The spring's wire diameter, coil length, and inside diameter all affect the price, because these numbers have to match the door's weight and size exactly. A heavier door, a wider door, or a door with extra insulation needs a stronger spring, which costs more than a standard spring for a lightweight single door.
Labor also plays a role. A door with easy ceiling access takes less time than one with a finished ceiling, low headroom, or an older track system that needs adjustment during the same visit.
A simple spring swap compared to a complicated one
On the low end, picture a single car door with one standard torsion spring, an unfinished garage ceiling, and no other worn parts. The technician removes the old spring, installs a matching one, balances the door, and tests it. This kind of job usually lands between $150 and $250.
On the high end, picture a heavy insulated double door with two torsion springs, worn cables that need replacing at the same time, and a garage with a low ceiling that makes access harder. Custom sized springs for oversized or heavy commercial style doors also add cost. Jobs like this can reach $400 to $450 once parts and labor are added together.
What a written spring replacement quote should list
A proper quote should spell out the spring's wire size, length, and inside diameter, the number of springs being replaced, and whether the spring is rated for standard or high cycle use. It should also state whether cables, drums, or bearings are included in the price or billed separately if they are found worn during inspection.
The quote should note the labor charge, any trip or diagnostic fee, and the warranty terms. Garage Door Reaper backs covered spring work with a 12 month warranty, and technicians confirm the final price with you before any work begins, after inspecting the whole door system.
- Spring wire size, length, and inside diameter
- Number of springs being replaced
- Cycle rating of the new springs
- Whether cables, drums, or bearings are included
- Labor cost and any diagnostic fee
- Warranty terms in writing
Signs a low spring quote will cost you more later
A price that seems far below the typical range is often a sign the spring being installed does not match your door's actual weight. A spring that is too weak will wear out fast, sometimes within months, which means paying for the same repair twice.
Watch for quotes that only replace the broken spring on a two spring door without mentioning the second one, quotes that skip a cable and roller inspection entirely, or quotes with no warranty attached. These shortcuts can leave you back at square one within a year.
Should you repair the spring or replace the whole system
In most cases, a broken spring is a repair, not a reason to replace the whole door. If the door panels, track, and opener are in good shape, swapping the springs restores normal function and is the more practical choice at this price point.
The exception is a door with multiple aging components. If the springs, cables, rollers, and opener are all original and near the end of their expected life, it may make more sense to address several of them in one visit rather than paying for separate service calls over the next year or two.
What a homeowner can check before calling for spring service
You can safely look for a visible gap in the spring coil above the door, which usually means it has snapped. You can also note whether the door feels unusually heavy when lifted by hand with the opener disconnected, or whether it slams down instead of closing smoothly.
Do not attempt to loosen, wind, or remove a torsion spring yourself. These springs hold a large amount of tension and can cause serious injury if handled without the right tools and training. Leave the winding bars and cone adjustments to a technician.
What happens when the technician arrives to quote the job
When a technician arrives, they inspect the entire door system, not just the broken spring. This includes checking the cables, drums, rollers, and opener, since a failed spring often puts extra strain on these parts.
After the inspection, the technician explains what they found, walks through the repair options, and confirms the exact price with you before any work begins. Same-day appointments are available when scheduling allows, which helps if a broken spring has left the door stuck. You can reach Garage Door Reaper at (214) 307-6420 to set up a visit.
Why waiting to fix a broken spring adds cost
A garage door with a broken spring is not designed to run on the opener alone. Forcing the door open or closed with the opener motor puts strain on the gears and drive system, which can turn a $150 to $450 spring repair into a separate opener repair costing $75 to $300 more.
Waiting also increases the risk to cables and drums, which can snap under the uneven load a broken spring creates. If the door is used repeatedly in this condition, it can come off track or drop suddenly, adding an off track repair in the $150 to $400 range on top of the original spring job.
Frequently asked questions
How long does torsion spring replacement take?
Most single spring jobs take about 45 minutes to an hour once the technician is on site. A two spring job, or one that also involves cables or drums, usually takes closer to an hour and a half.
Can I replace just one spring if I have two?
You can, but most technicians recommend replacing both at the same time. If one spring failed, the other has usually seen the same wear and tear and is likely to fail soon after.
Why do two springs cost more than one?
A two spring door needs two matching springs installed and balanced together, which means more parts and more labor time compared to a single spring door.
Is it safe to use my garage door with a broken spring?
It is not a good idea. The opener is not built to lift the door's full weight without spring assistance, and forcing it can damage the opener, cables, or drums.
Does the price include balancing the door afterward?
Yes, balancing the door is part of a proper spring replacement. A technician tests and adjusts the springs so the door opens and closes evenly before the job is considered finished.